CAN 300 PRO, communication module
(0) Yorum - 0 Puan
Kategori
Stok Kodu
700-600-CAN12
The CAN 300 PRO module, for use in an S7-300* from Siemens, enables connection of CAN participants with the automation device.
The module can be plugged into either the central frame or the expansion frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) telegrams with a freely selectable baud rate from 10 kbps to 1 Mbps.
The CAN 300 PRO can send and receive CAN telegrams in Layer 2 mode. In the CANopen® master mode, the data of the CANopen® slaves can be processed as a process map in the PLC.
Use as a CANopen® slave is also possible. For standard applications, such as motor control with CANopen®, application examples are available. In addition, handling blocks for the SAE J1939 protocol are available.
There are 16 freely settable timers available in the CAN 300 PRO.
Each timer can trigger a freely programmable CAN telegram. This means the synchronous protocols widely available in drive and servo control are easy to implement using the CAN 300 PRO. A DIP switch for setting the baud rate and station address facilitates commissioning. An optional Micro memory card stores the project. In this way, replacement of the parameterization or the module during servicing can be carried out quickly.
6 LEDs indicate the operating status of the module. There is a USB interface for diagnostics and parameterization.
The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.
A USB programming cable is included in the delivery.
The module can be plugged into either the central frame or the expansion frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) telegrams with a freely selectable baud rate from 10 kbps to 1 Mbps.
The CAN 300 PRO can send and receive CAN telegrams in Layer 2 mode. In the CANopen® master mode, the data of the CANopen® slaves can be processed as a process map in the PLC.
Use as a CANopen® slave is also possible. For standard applications, such as motor control with CANopen®, application examples are available. In addition, handling blocks for the SAE J1939 protocol are available.
There are 16 freely settable timers available in the CAN 300 PRO.
Each timer can trigger a freely programmable CAN telegram. This means the synchronous protocols widely available in drive and servo control are easy to implement using the CAN 300 PRO. A DIP switch for setting the baud rate and station address facilitates commissioning. An optional Micro memory card stores the project. In this way, replacement of the parameterization or the module during servicing can be carried out quickly.
6 LEDs indicate the operating status of the module. There is a USB interface for diagnostics and parameterization.
The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.
A USB programming cable is included in the delivery.
Bu ürüne ilk yorumu siz yapın!