CANopen Slave - Modbus Plus Slave
(0) Yorum - 0 Puan
Kategori
Stok Kodu
AB7896
 |
CANopen PDO and SDO data objects supported |
|
|
CANopen Unscheduled data exchange support |
|
|
CANopen Watch-dog timer |
|
|
CANopen profile DS-301 |
|
|
Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register |
|
|
Modbus Plus Host Firmware Rev. 77 |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | max 400 mA |
| I/O Input: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data) |
| I/O Output: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| CANopen baudrate: | 10 kbit/s to 1 Mbit/s |
| CANopen connector: | D-sub 9-pin male |
| CANopen address: | Node address 1-99 |
| CANopen config.: | Configured by CanOpen Master via EDS file (provided by HMS) |
| Modbus Plus baudrate: | 1 Mbit/s |
| Modbus Plus address: | Node-ID and Source-ID 1-64 |
| ModbusPlus connector: | D-sub 9-pin female |
Bu ürüne ilk yorumu siz yapın!