ControlNet Adapter/Slave - CANopen Slave
(0) Yorum - 0 Puan
Stok Kodu
AB7868
| Multicasts of both inputs and peer-to peer data on ControlNet | |
 |
ControlNet Media redundancy |
|
|
ControlNet Specification version: Communications Adapter profile 12 |
|
|
CANopen Unscheduled data exchange support |
|
|
CANopen PDO and SDO data objects supported |
|
|
CANopen profile DS-301 v.4.02 |
|
|
Customizable PDO-mapping |
|
|
Heatbeat and node guarding support |
|
|
Network Stor/Restore functionality |
|
|
ControlNet CONFORMANCE TESTED™ |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | max 400 mA |
| I/O Input: | Default 20 bytes, max 512 bytes (max 450 bytes as I/O on ControlNet) |
| I/O Output: | Default 20 bytes, max 512 bytes (max 450 bytes as I/O on ControlNet) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| ControlNet baudrate: | 5Mbit/s |
| ControlNet MacID: | 1-99 |
| ControlNet connector: | Dual BNC coaxial connectors |
| ControlNet config.: | Configured by ControlNet Scanner via EDS file (provided by HMS) |
| CANopen baudrate: | 10 kbit/s to 1 Mbit/s |
| CANopen connector: | D-sub 9-pin male |
| CANopen address: | Node address 1-99 |
| CANopen config.: | Configured by CanOpen Master via EDS file (provided by HMS) |
Bu ürüne ilk yorumu siz yapın!