ControlNet Adapter/Slave - Modbus Plus Slave
(0) Yorum - 0 Puan
Stok Kodu
AB7870
 |
Multicasts of both inputs and peer-to peer data on ControlNet |
|
|
ControlNet Media redundancy |
|
|
ControlNet Specification version: Communications Adapter profile 12 |
|
|
Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register |
|
|
Modbus Plus Host Firmware Rev. 77 |
|
|
ControlNet CONFORMANCE TESTED™ |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | max 400 mA |
| I/O Input: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data, max 450 bytes as I/O on ControlNet) |
| I/O Output: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data, max 450 bytes as I/O on ControlNet) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| ControlNet baudrate: | 5Mbit/s |
| ControlNet MacID: | 1-99 |
| ControlNet connector: | Dual BNC coaxial connectors |
| ControlNet config.: | Configured by ControlNet Scanner via EDS file (provided by HMS) |
| Modbus Plus baudrate: | 1 Mbit/s |
| Modbus Plus address: | Node-ID and Source-ID 1-64 |
| ModbusPlus connector: | D-sub 9-pin female |
Bu ürüne ilk yorumu siz yapın!