Ethernet/IP Adapter/Slave - Modbus Plus Slave
(0) Yorum - 0 Puan
Stok Kodu
AB7840
 |
Ethernet 10/100 Mbit/s twisted pair RJ45 connection |
|
|
TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches |
|
|
Ethernet/IP level 2 I/O Server CIP |
|
|
1.4 Mbyte storage space on Flash disk |
|
|
Support for AnyBus IPconfig utility for easy TCP/IP set up |
|
|
SSI scripts used for easy display/control of process data on webpages |
|
|
Gateway diagnostics via WEB-pages |
|
|
Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register |
|
|
Modbus Plus Host Firmware Rev. 77 |
|
|
Support for Anybus OPC Server |
|
|
EtherNet/IP CONFORMANCE TESTED™ |
|
|
Announced based DLR (Device Level Ring) |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | Max 400mA at 24VDC |
| I/O Input: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data) |
| I/O Output: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| Ethernet/IP baudrate: | 10/100 Mbit/s autodetect |
| Ethernet connector: | RJ45 |
| Ethernet/IP address: | Any valid IP-address |
| Ethernet/IP config.: | Configured by EtherNet/IP Scanner via EDS file (provided by HMS) |
| Modbus Plus baudrate: | 1 Mbit/s |
| Modbus Plus address: | Node-ID and Source-ID 1-64 |
| ModbusPlus connector: | D-sub 9-pin female |
Bu ürüne ilk yorumu siz yapın!