The FLEXtra® FO is a PROFIBUS repeater expanded by 2 (with the FLEXtra® FO 650-2) and 5 (with the FLEXtra® FO 650-5) optical MPI/PROFIBUS segments.
It enables conversion of electrical MPI/PROFIBUS interfaces into optical MPI/PROFIBUS interfaces.
On PROFIBUS, the FLEXtra® FO reaches transmission rates from 9.6 kbps to 12 Mbps with automatic baud rate detection. Due to the optical signal transmission, it offers complete electrical isolation between the PROFIBUS participants and PROFIBUS subnets.
Another advantage of the FLEXtra® FO is its insensitivity to EMC influences.
The transmission signals are converted by the FLEXtra® FO into optical signals and sent across the fiber-optic link. In addition, the signals are regenerated in slope, level, and duty cycle.
The FLEXtra® FO is perfect with existing transmission systems, since it is available with 3 different optical interfaces. It is also suitable for POF* and PCF* FO.
For the short range up to 65 m, an optical transmission link can be established very quickly and without much effort using the POF*. For longer distances up to 250 m, PCF* FO can be used.
The optical interface of the FLEXtra® FO sends in the visible range (650 nm red light), which allows an initial check of the optical transmission link without expensive instruments.
The FLEXtra® FO features integrated status LEDs for each segment for diagnostic purposes. In this way you are always informed about the state of the bus and the optical interface, and targeted troubleshooting is ensured.
In addition, the FLEXtra® FO has DIP switches for turning off individual or all segments. The segments are separated but continue to function for themselves.
Features
• PROFIBUS repeater with 2/5 optical MPI/PROFIBUS segments
• Perfect to combine with existing transmission systems
• PROFIBUS baud rate (9.6 kbps ... 12 Mbps) automatic detection
• Switching off of individual or all segments possible
• For use in EMC-hazardous environments
• Suitable for POF* and PCF* FO
• Available with 3 different optical interfaces (SMA, BFOC**, Versatile Link***)
• Range:
- Cable length POF* 65 m
- Cable length PCF* 250 m
• Display of traffic/bus errors for each FO and PROFIBUS segment
It enables conversion of electrical MPI/PROFIBUS interfaces into optical MPI/PROFIBUS interfaces.
On PROFIBUS, the FLEXtra® FO reaches transmission rates from 9.6 kbps to 12 Mbps with automatic baud rate detection. Due to the optical signal transmission, it offers complete electrical isolation between the PROFIBUS participants and PROFIBUS subnets.
Another advantage of the FLEXtra® FO is its insensitivity to EMC influences.
The transmission signals are converted by the FLEXtra® FO into optical signals and sent across the fiber-optic link. In addition, the signals are regenerated in slope, level, and duty cycle.
The FLEXtra® FO is perfect with existing transmission systems, since it is available with 3 different optical interfaces. It is also suitable for POF* and PCF* FO.
For the short range up to 65 m, an optical transmission link can be established very quickly and without much effort using the POF*. For longer distances up to 250 m, PCF* FO can be used.
The optical interface of the FLEXtra® FO sends in the visible range (650 nm red light), which allows an initial check of the optical transmission link without expensive instruments.
The FLEXtra® FO features integrated status LEDs for each segment for diagnostic purposes. In this way you are always informed about the state of the bus and the optical interface, and targeted troubleshooting is ensured.
In addition, the FLEXtra® FO has DIP switches for turning off individual or all segments. The segments are separated but continue to function for themselves.
Features
• PROFIBUS repeater with 2/5 optical MPI/PROFIBUS segments
• Perfect to combine with existing transmission systems
• PROFIBUS baud rate (9.6 kbps ... 12 Mbps) automatic detection
• Switching off of individual or all segments possible
• For use in EMC-hazardous environments
• Suitable for POF* and PCF* FO
• Available with 3 different optical interfaces (SMA, BFOC**, Versatile Link***)
• Range:
- Cable length POF* 65 m
- Cable length PCF* 250 m
• Display of traffic/bus errors for each FO and PROFIBUS segment
Bu ürüne ilk yorumu siz yapın!