Modbus Plus Slave - CC Link Slave
(0) Yorum - 0 Puan
Stok Kodu
AB7624
 |
Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register |
|
|
Modbus Plus Host Firmware Rev. 77 |
|
|
Uses up to 4 occupied stations on CC-Link - configurable size |
|
|
Uses the CC-Link PLC profile for data exchange |
|
|
Support for CC-Link version 2.0 with extended data |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | max 400 mA |
| I/O Input: | Default 20 bytes, CC-Link V.2: max. 368 bytes (max 896 I/O-points and 128 words) CC-Link V.1: max 48 bytes (max 128 I/O-points and 16 words) |
| I/O Output: | Default 20 bytes, CC-Link V.2: max. 368 bytes (max 896 I/O-points and 128 words) CC-Link V.1: max 48 bytes (max 128 I/O-points and 16 words) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| Modbus Plus baudrate: | 1 Mbit/s |
| Modbus Plus address: | Node-ID and Source-ID 1-64 |
| ModbusPlus connector: | D-sub 9-pin female |
| CC-Link baudrate: | 156kbps to 10Mbps |
| CC-Link address: | Station 1-64 |
| CC-Link connector: | 5-pole 5.08 mm Phoenix pluggable screw connector |
| CC-Link config.: | Configured by CC Link Master via CSP Config file (provided by HMS) |
Bu ürüne ilk yorumu siz yapın!