Modbus Plus Slave - LonWorks
(0) Yorum - 0 Puan
Kategori
Stok Kodu
AB7625
 |
Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register |
|
|
Modbus Plus Host Firmware Rev. 77 |
|
|
Special LW Config Software Tool for Network variable Setup |
|
|
Certification prepared for Lonmark application layer interoperability guidelines V3.2 |
|
|
LonWorks FT-X1 Transceiver |
| TECHNICAL SPECIFICATIONS | |
| Size: | 114 mm x 44 mm x 127 mm |
| Power Supply: | 24 VDC (±20%) |
| Temperature: | -25-65°C |
| Current Consump: | max 400 mA |
| I/O Input: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data, max 256 network variables on LonWorks) |
| I/O Output: | Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data, max 256 network variables on LonWorks) |
| Mech Rating: | IP20/Nema1 |
| Power supply connector: | 2-pole 5.08 mm Phoenix pluggable screw connector |
| Modbus Plus baudrate: | 1 Mbit/s |
| Modbus Plus address: | Node-ID and Source-ID 1-64 |
| ModbusPlus connector: | D-sub 9-pin female |
| LonWorks baudrate: | 78 kbit/s |
| LonWorks Connector: | 5-pole 5.08 mm Phoenix pluggable screw connector |
| Price Group: | C |
| LonWorks Config: | LW Tool ABX for LonWorks interface variable configuration (included). |
Bu ürüne ilk yorumu siz yapın!