PROFIBUS KONEKTÖR, 90° ATEX SERTİFİKALI, VİDALI TİP
(0) Yorum - 0 Puan
Kategori
Stok Kodu
700-973-0BA12
PROFIBUS connector 90° with ATEX approval is suitable for use in hazardous areas of zone 2 (explosive gas atmosphere occurs only rarely and briefly).
The bus connector is plugged directly into the PROFIBUS interface (SUB-D socket, 9-pin) of the PROFIBUS participants. The PROFIBUS cables are connected using 4-pin screw terminals. A slide switch is used to set whether the connector is to be used as a node or at the segment end. The switch can also be operated in the installed condition. The setting is clearly visible.
The plug is quickly mounted and has integrated, connectable terminating resistors.
Features
• Metalized housing
• No parts that can be lost
• Integrated switchable terminating resistor
• 90° cable outlet
• ATEX approval (II 3 G Ex nA II T4)
• Proven screw terminal
The bus connector is plugged directly into the PROFIBUS interface (SUB-D socket, 9-pin) of the PROFIBUS participants. The PROFIBUS cables are connected using 4-pin screw terminals. A slide switch is used to set whether the connector is to be used as a node or at the segment end. The switch can also be operated in the installed condition. The setting is clearly visible.
The plug is quickly mounted and has integrated, connectable terminating resistors.
Features
• Metalized housing
• No parts that can be lost
• Integrated switchable terminating resistor
• 90° cable outlet
• ATEX approval (II 3 G Ex nA II T4)
• Proven screw terminal
Bu ürüne ilk yorumu siz yapın!