KNX to LonWorks
- IBOX-LON-KNX-200 (200 points)
- IBOX-LON-KNX-A (500 points)
- IBOX-LON-KNX-B (4000 points)
DESCRIPTION:
The IntesisBox LON-KNX is a device meant to enable interworking between KNX (TP-1) and LON (TP/FT-10) control networks.
This ending is achieved by effectively implementing both a Network Variables’ (NVs) interface on the LON side and a Communication Objects’ interface on the KNX side. Data points on either side (NVs at LON or Communication Objects at KNX) are internally bound within the IntesisBox LON-KNX, allowing the information to be moved from KNX to LON and vice-versa.
Thus, IntesisBox LON-KNX will be seen as a regular LON device on the LON TP/FT-10 network and a regular KNX device at the KNX TP-1 network.
The set of Communication Objects on the KNX interface, the set of NVs at the LON interface and the bindings between them are defined in the IntesisBox LON-KNX at configuration time.