ModBus to KNX

• IBKNXMBM1000000 (100 points version)
• IBKNXMBM2500000 (250 points version)
• IBKNXMBM6000000 (600 points version)
• IBKNXMBM1K20000 (1200 points version)
• IBKNXMBM3K00000 (3000 points version)

DESCRIPTION:

IntesisBox is a Modbus RTU Master and TCP Client device allowing to read/write points of other Modbus RTU Slave device(s) and Server device(s) connected to a Modbus network, offering these point's values through its KNX/EIB interface.

From the Modbus system point of view, after the start-up process, IntesisBox reads continuously the points configured to be read in the Modbus Slave devices and updates in its memory all the values received from the Modbus system. Points of Modbus devices can be read/written from KNX at any time.


On the KNX side, IntesisBox simulates a KNX device and acts as if it was a single device into the KNX system.

The IntesisBox's KNX EIB interface connects directly to the EIB bus and it is optoisolated from the rest of the internal electronics. Any point in IntesisBox can be configured individually for different functionalities:

• Allow read requests
• Allow write requests
• Automatically send a write request to the KNX bus when its value changes
• Send a read request to the KNX bus when IntesisBox starts-up or after a KNX bus reset.

For each point, one KNX main group address and different listening group addresses can be defined. This useful feature allows actions on the same internal point from multiple KNX group addresses.