J1939 - Profibus Slave
(0) Yorum - 0 Puan
 |
Supports SAE J1939 vehicle protocol over CAN and PROFIBUS -DP (Slave) Industrial Automation protocol. |
|
|
The AB7614 is a configurable gateway, allowing the user to configure the specific J1939 PGN messages to be transmitted or received by the module as well as the particular data within a PGN that is required for the users application. |
|
|
Supports FLASH field upgrades |
|
|
Rugged extruded aluminum enclosure |
|
|
The module now supports up to 35 incoming J1939 Transport Protocol (large message) sessions. Previously the module was limited to a single BAM and RTS/CTS session. |
|
|
The module can now monitor up to 120 different PGNs in the Input data point configuration and transmit up to 100 different PGNs in the Output data point configuration. The previous limitation was 50 and 50. |
|
|
The J1939 Transport Protocol (large message) handler now rejects incoming session requests (both BAM and RTS/CTS) for PGN/Address pairs that are not configured as input data points. |
|
|
The SPN Conversion Method Flag is now included in the high bit of the Occurrence Count field in the J1939 diagnostic table entries. See the important notes section above and the user manual for more details. |
| TECHNICAL SPECIFICATIONS | |
| Mech Rating: | IP20 / NEMA 1 |
 |
|
| EMC Compliance: | EN50081-2 and EN50082-2 |
|
|
| Certifications: | CE & cULus |
|
|
| Price group: | A |
Bu ürüne ilk yorumu siz yapın!